I have one ZD and one XB and want to send data from the ZB to XB, which is connected to a terminal (I have already verified the XB is working as half of a two-XB setup).
When I use Zigduino Radio to set the channel and send data, followed by an endTransmission(), no data appears in the XBEE. I have set the channel the same on both ends and the DH==DL=0 in the XB.
Does ZD Radio send everything broadcast? I noticed my ZB book says broadcast is DH=0, DL=FFFF but that does not work with two XB's.
What should those settings be?